Home RTX 2.0 with Optical, RCA or 3.5mm support and streams up to 160ft
Note: Both of these products feature aptX Low Latency, perfect for use with TVs, Playstation or Nintendo.
Simple, Connect into your TV or Home AV audio via TOSLINK Optical or 3.5mm connections.
"Top pick for television audio!" aptX LOW LATENCY codec offers crystal clear sound with no noticeable lip-sync delay.
When in range, it conveniently reconnects with your last paired device.
Small and Flexible: Powered by any USB port and small enough to adhere to your television or Home AV with the included Velcro mounts.
Access to reliable live phone support M-F, 11am-4pm EST. Email support available 24hrs.
Featuring aptX LOW LATENCY and optical TOSLINK connection, the Miccus Home RTX Mini is the audiophile’s wireless solution to add bluetooth to your TV or existing audio system. Find out just how good your television and stereo can sound combining the full spectrum aptX LOW LATENCY wireless audio codec and pure digital optical in and out.
2-in-1 Modes:The Miccus Home RTX Mini offers 2 in 1 flexibility as either a Transmitter or a Receiver, doubling your audio wireless opportunities.
Use as a Bluetooth transmitter (TX mode): physically connect with your Television or home audio equipment and wirelessly stream music to any Bluetooth headphones or speakers. Use with aptX LOW LATENCY equipped headphones and speakers for an unmatched listening experience.
Use as a Bluetooth receiver (RX mode): pair with your smartphone, tablet or computer and physically connect your RTX Mini to your existing audio equipment to stream iTunes, Pandora, Spotify, Podcasts and more. Be your own DJ in Receive mode, connect to your home stereo and control audio from your phone or tablet. No need to walk across the room to adjust the stereo. Play or pause your audio and change your volume effortlessly from your phone.
Perfect for TV, No Audio Delay:Welcome to the world of aptX Low Latency, ultra fast audio with no noticeable delay. Standard bluetooth operate with a 2-4 second delay causing lip sync issues. aptX Low Latency delivers sound in sync with visual media, perfect for TV or Gaming use. Connect with either Optical or Analog connections:Connect to home stereo sound systems, AV equipment, audio receivers, speakers, Amazon Echo, Google Home, Sony, Samsung, PS4, XBOX, Nintendo Switch, LG, Yamaha,Onkyo, and more
Pair/Link to 2 devices:The RTX Mini supports dual, multi-point device pairing. Connect to two phones, two speakers, two headphones, etc.Note: When paired with two devices, the Home RTX Mini is NOT aptx low latency. If you want no audio delay when two headphones or speakers are paired, consider the Miccus Home RTX 2.0 offers TRUE Dual link. Easy to Use: Truly a set and forget solution. Pair it once and the Home RTX mini will always look for that device every time it powers on. Powered by a USB cable, it will power on and off with your Television, Car or home audio systems. Use the included Velcro strip to easily attach out of sight.
Powered by mini USB:It can be connected to any USB port, compatible USB wall adapter, USB car adapter, or with the included USB power supply.
Use with aptX Low Latency Compatible Devices:Note: The Miccus RTX Mini will only work in aptX LOW LATENCY when paired with other receivers or transmitters that also support the aptX LOW LATENCY protocol. Use withBluetooth headphones or speaker that also supports aptX LOW LATENCY
If television or gaming audio is your primary goal, purchase the RTX Miniand use withBluetooth headphones or speaker that also support aptX LOW LATENCY, such as the Miccus Stealth SR-71 Bluetooth Headphones.
If you need to purchase headphones, get 15% off individual product prices by purchasing a Miccus Low Latency TV Bundle 1. The Bundle includes the Home RTX Mini and the Miccus Stealth SR-71 Headphones and delivers audio in aptX Low Latency codec together.The best part? The items come already PRE-PAIRED for you.
If you want to extend your wireless operating area past the standard bluetooth 33ft, consider the Miccus Home RTX 2.0 which has an operating range up to 160ft! It also offers automatic optical bypass and true dual link, i.e. when paired to two devices, both links delivery audio in aptx low latency.
What's the real story? Here are Amazon reviews on the Home RTX Mini:
Swabodda says "Works exactly as described. Very easy to setup. It came with everything needed to make all of the wired connections to the TV and even included self-adhesive velcro. All I had to add was the headphones."
Terra says "I bought this so I could listen to the TV in my bedroom late at night without disturbing the neighbors. I'm a little hard of hearing and the TV sits against the wall, the walls are thin and their bed is right on the other side. My bed is across a pretty long room and so I was faced with a dilemma: if it's loud enough for me to enjoy, it's also loud enough for them to not enjoy. ...This little transmitter is velcro'd to the side of my TV facing toward the speakers, and sends the most perfect audio stream over to them. There's zero delay or desync with the audio and video. There's never any issues. I can have crisp, clear talking, music, car chases, and explosions right behind my head. It took about 5 seconds to pair the speakers, the first time I did it, I had them close to the TV. Now every time I turn them or the TV on it's automatically paired. When the TV is off, the light goes out, so no annoying lights when i'm sleeping.
E. Nash says "My hearing is getting poor and I was looking for a high-quality source of TV audio so that I can watch with my family without deafening them. Purchased this along with the Miccus LOW LATENCY Bluetooth v4.1 Over-Ear Headphones, HD Sound, Ideal for TV, Movies, Games, NO LIP SYNC, Foldable with Hard Case - (SR-71 Stealth) to use with the optical audio out on my Panasonic Viera HDTV, which like most new TVs lacks an auxiliary audio out. Quality of both parts of the system is excellent. Instructions were a little sparse as other reviewers have mentioned but setup was quick and easy, less than 5 minutes to full operation. Sound fidelity is terrific with no latency at all, just be prepared for a few seconds of sync "stutter" when you first connect the headphones- it goes away in a matter of seconds. Note that on most TVs you can use optical out and the native TV speakers together with no conflict. If you use your optical out to a sound bar or other system then just use an optical splitter- no degradation of signal.
What's in the box?:
Miccus Home RTX mini (MHMRTX4-OPT)
Optical Audio cable
USB Power cable
Velcro mounts for discreet attachment behind your TV or Stereo.
Bluetooth v4.1 (compatible with Bluetooth v2.0 or higher), Profiles - A2DP, AVRCP
Audio codecs: SBC, AAC, aptX, aptX-LL, NOTE aptX-LL requires both devices in a pairing to support the aptX-Low Latency codec.
Operating range: up to 33 ft (10 M), Operating Frequency: 2.4 GHz.
Power Input 5V DC 500mA, Dimensions 99.6*23.6*23.6mm, Weight 25g.
Optical Support: Sample Rate <=48KHz, Formats PCM / LPCM, Dolby Digital 2.0 (Format changes are accessed thru your TV’s audio settings menu)
Frequently Asked Questions
HOW DO I USE THE HOME RTX MINI (VIDEO)?
I'M EXPERIENCING LIP SYNC DELAY WHILE WATCHING T.V. WHY?
The Miccus Home RTX Mini supports the following 3 Bluetooth codecs: SBC, aptX, and aptx Low Latency. In order to connect with your headphones or speaker using the aptX Low Latency codec (38-40 millisecond end to end delay time), your headphones or speaker must also support the aptX Low Latency codec. If not, the Home RTX Mini will connect with your headphones or speaker using the highest quality common codec. Since all Bluetooth audio devices support the SBC codec, the highest quality common codec is typically SBC. The end to end latency for the SBC codec is 250-270 milliseconds (roughly 1/4 second of delay).
MY RTX MINI IS CONNECT TO AN OPTICAL SOURCE, BUT IT'S SET TO "AUX". WHY?
In order to hear audio, the correct audio source must be selected. On the front of the RTX Mini there are 2 audio source indicator lights. Once paired, you may select either "Optical" or "Aux" as the audio source. If your audio source is "Optical" and the indicator light is set to "Aux", select "Optical" by pushing the multi-function slider switch all the way to the right, and releasing it.
THE RTX MINI'S BLUE "M" FLASHES, BUT MY HEADPHONES DON'T PAIR. WHY?
When powering on the Miccus Home RTX Mini, the blue "M" indicator light flashes once every 2-3 seconds indicating it is in standby mode. To place the RTX Mini into pairing mode, push the multi-function slider all the to the right and hold for 3 seconds until the blue "m" begins blinking on and off rapidly (roughly 4 times per second). Once paired, the blue "m" indicator will be lit a solid blue.
WHAT DIGITAL AUIO PROTOCOL(S) DOES THE HOME RTX MINI SUPPORT?
Dolby Digital 2.0, PCM, LPCM, and other STEREO digital audio protocols have been carefully tested with major television makes and models and have been verified to work with the Home RTX Mini. If you are having difficulty getting your television to send optical audio to the the Home RTX Mini, be sure to check your television's audio output options by selecting the digital or TOSLINK output and choose the proper digital audio protocol: the Home RTX Mini does not recognize Dolby Digital 5.1 or higher.
I CAN'T SEE THE HOME RTX MINI'S INDICATOR LIGHTS. WHY?
The Miccus Home RTX Mini ships with a protective sticker over the indicator lights on the front panel of the unit. As per the owner's manual, please remove the sticker before use.
WHAT IS APTX LOW LATENCY?
aptX Low Latency is a Bluetooth codec that features an end to end latency of roughly 40 milliseconds. aptX Low Latency is the best codec to use for television audio because it virtually eliminates lip sync issues that are commonly present when using Bluetooth devices that support either the SBC codec or even the standard aptX codec. The Miccus Home RTX Mini features support for the SBC codec, the aptX codec, and the aptX Low Latency codec making it very flexible and a good match up in virtually any Bluetooth environment.
HOW DO I FACTORY RESET MY HOME RTX MINI?
To clear the memory in your Home RTX Mini:
Make sure your Home RTX Mini is powered ON.
Press and hold the spring loaded slider switch all the way to the right for roughly 6-8 seconds until all 3 indicator lights light up together, then release the spring loaded slider.
The Blue "M" indicator light will continue flashing quickly as if in pairing mode for approximately two minutes. When it begins blinking slowly again, the Mini is ready for use.